Home / Service Areas / Cedar Hills, UT / Whole House Rewiring

Whole House Rewiring in Cedar Hills, UT

If you are searching for whole house rewiring in Cedar Hills, UT, this is the page. Full and partial rewires for older homes, knob and tube removal, aluminum wiring remediation and circuit-by-circuit replacement you can phase over time.

Call (888) 633-7804 Request service

24/7Phones answered

FlatQuoted before we start

Cedar HillsLocal service area

Other services hereCedar Hills, UT

1Emergency Electrician in Cedar Hills

2Electrical Panel Upgrade in Cedar Hills

3EV Charger Installation in Cedar Hills

4Whole House Rewiring in Cedar Hills

5Generator Installation in Cedar Hills

6Lighting Installation in Cedar Hills

7Electrical Repair in Cedar Hills

8Electrical Installation in Cedar Hills

9Commercial Electrician in Cedar Hills

10Smart Home Wiring in Cedar Hills

Every circuit above is live in Cedar Hills. Call any hour.

Sparking outlet, burning smell or no power in Cedar Hills?

Do not reset it a third time. Call now and we will talk you through making it safe.

Call (888) 633-7804 now

What our whole house rewiring service covers in Cedar Hills

Everything below is standard work for us in Cedar Hills, UT. If your situation is not on the list, call (888) 633-7804 and describe it — odds are we have seen it.

Partial rewires by room so the cost can be spread over time
New dedicated circuits for kitchens, laundry and mechanical rooms
Drywall openings kept small and placed where patching is easy
Full-home rewires for houses built before modern wiring methods

Knob and tube wiring replacement, attic and wall runs included
Aluminum branch circuit replacement or approved pigtail repair
Two-prong to grounded three-prong outlet conversions
Cloth and rubber insulated wire that crumbles when moved

How whole house rewiring works in Cedar Hills

Call or text

Tell us the symptom at (888) 633-7804. Nights and weekends reach a person, not a machine.

We diagnose

An electrician traces the actual fault at your Cedar Hills property instead of swapping parts and hoping.

Flat price first

You get the number in writing before any work begins, including after-hours rates.

Fixed and tested

We test under load, clean up, label what we touched and show you what changed.

Every whole house rewiring job in Cedar Hills is quoted flat. You approve the number first, and it does not move because the work turned out to be harder than it looked from the driveway.

Whole House Rewiring across Cedar Hills, UT

We cover all of Cedar Hills and the Utah County area for this service, including downtown Cedar Hills, north Cedar Hills, south Cedar Hills, east Cedar Hills. Same-week booking is normal for scheduled work, and emergency calls are dispatched the moment you ring (888) 633-7804.

Whole House Rewiring near downtown Cedar Hills
Whole House Rewiring near north Cedar Hills
Whole House Rewiring near south Cedar Hills
Whole House Rewiring near east Cedar Hills
Whole House Rewiring near west Cedar Hills
Whole House Rewiring near the outskirts of Cedar Hills

Call (888) 633-7804

Reviews from Cedar Hills customers

★★★★★

Aluminum wiring in a 70s house. They explained the options instead of pushing the most expensive one, then did the pigtail work properly.

Lorraine B.east Cedar Hills

★★★★★

Our restaurant lost power to the hood on a Friday night. They were there in under an hour and had us cooking again before the rush ended.

Owner, Cedar HillsCedar Hills

★★★★★

Burning smell near the panel at 6am. They talked me through shutting off the main on the phone and had someone here in forty minutes.

Melissa O.Cedar Hills

Whole House Rewiring in Cedar Hills — questions we get asked

Do we have to move out during a rewire?

Most Cedar Hills families stay put. We work room by room and restore power to finished areas at the end of each day. Only a full gut remodel, or a very small house where every circuit is disturbed at once, makes staying elsewhere worth it.

How much does whole house rewiring cost in Cedar Hills?

It tracks square footage, how many floors, whether there is an attic or crawlspace to fish from, and whether the panel has to be replaced at the same time. We walk the house, write the scope down, and give you one flat number before anything is opened up.

How do I know if I have knob and tube or aluminum wiring?

Knob and tube shows up in attics and basements as single wires running through white ceramic knobs. Aluminum branch wiring is common in homes built in the late 1960s and 1970s and is usually marked AL on the cable jacket. We will tell you what you have at the first visit.

Can you just rewire part of the house?

Yes, and it is a common route in Cedar Hills. Kitchens, bathrooms and bedrooms usually come first because that is where the load and the safety risk are. We sequence it so each phase stands on its own and nothing has to be redone later.